Flashers
Micro Dimmer/Flasher with Remote 6A
£12.00
- This easy to operate ultra compact, micro dimmer has multiple options.
The Remote Control has 8 modes and 'one press' feature for 25%, 50% and 100% brightness.
It's to be placed between the PSU and the LEDs to control the LED functions.
By using convenient 2.1mm DC fixings at either end it couldn't be simpler.
The connectors can be cut off and used with bare wires if necessary.
Simple!
This product isn't waterproof. It needs to be suitably protected from the weather and can either be positioned in a waterproof junction box or inside the building/house.
Will work with any of our 5v/12v/24v single colour modules and strips. - Input Voltage: 5-24vdc
Max Current Load: 6A
Max Outpur Power: 30w/72w/144w (5/12v/24v)
Working Temp: -30C ~ 55C
Controller Size: 42*12*3mm + connectors
Working Frequency: 433.92Mhz
Range: 30m in open space
Micro Dimmer/Flasher 12A
£7.00
- This easy to operate ultra slim, micro dimmer has multiple options.
It's to be placed between the PSU and the LEDs to control the LED functions.
By using convenient 2.1mm DC fixings at either end it couldn't be simpler.
The connectors can be cut off and used with bare wires if necessary.
To change the modes, brightness and speeds just press the buttons, Job Done!
This product isn't waterproof. It needs to be suitably protected from the weather and can either be positioned in a waterproof junction box or inside the building/house.
Will work with any of our 5v/12v/24v single colour modules and strips. - Input Voltage: 5-24vdc
Max Current Load: MAX 12A
Max Outpur Power: 60w/144w/288w (5v/12v/24v)
Working Temp: -30C ~ 55C
Controller Size: 42*12*3mm + connectors
311 Dimmer/Flasher with Remote 18A
£45.00
-
Our 311RF Dimmer with Remote are robust & powerful. With a whopping 18A to play with, this will control heavy duty signs & displays.
The controller has all the buttons you'd need right on the controller itself, but it comes with a handy remote which mirrors the buttons for ease of use.
With various memory buttons, speed, brightness and a mode button that lets you choose from 6 pre-programmed effects and the option to program your own basic scene, you'll be spoilt for choice.
The controller itself will need to be protected from the weather and can either be positioned inside the sign, a waterproof junction box or inside the building.
Will work with any of our 12v/24v single colour modules and strips.
- Input Voltage: 12-24vdc
Max Current Load: 6A x 3Channels MAX 18A
Max Outpur Power: 216w/432w (12v/24v)
Working Temp: -30C ~ 55C
Controller Size: 211*40*30mm
Remote Size: 122*50*16mm
Working Frequency: 433.92Mhz
Remote Working Voltage: 12V (Battery A23, V23GA, MN21)
Range: 100m
Flasher Unit
£62.22
-
10-40v 2 Output Flasher Unit, with 5amp max on each output
With a choice of 15 flash patterns, from simple flashing, alternating, intermittent, hazard and 'emergency service' options.
Supplied with an extra 'momentary switch', you can decide to solder this to the 'selector' wire to make changing the program simple: This is not required for the flashing unit to work.
- Operating Voltage : 12v or 24v
Power: up to 144w
Dimensions: 42 x 12 x 3mm + connectors/remote
Output Current: Max 10A - 5Ax2ch
**To figure out how many amps your LED will use, divide the total number of Watts by the voltage.
ie: 20 x Sgled3 LED modules @ 0.3w each = 6w total - 6w divided by 12v = 0.5amps - Datasheet Download