E14 Components
E14 Cabochon - 15 Colours
£0.75
- Our E14 Cabochons create a striking radial effect from the base, while the cap generates a highly attractive Diamond like effect, emitting powerful luminosity from all angles, for all to see.
Supplied in 2 parts - Cap & Base
Choice of 15 Colours:
Aqua, Clear, Orange, Yellow, Blue, Green, Red, Opal, Fuchsia, Magenta, Purple, Turquoise, Fluorescent Pink, Fluorescent Yellow & Fluorescent Orange
You will need the following items to complete the fairground lights:
1. E14 Spike Lampholder and Nut
2. E14 24v LED or 24v or 230v Incandescent Bulb
3. 24v Power Supply Unit (PSU) if applicable - - E14 Cabochons are 60mm dia tapering down to 40mm x 63mm high
They are made of multicolor transparent metachrylate and have a bright effect with central luminous lens. It comes in 2 parts with a lens cap and a conic base with internal thread for E14 socket which can hold led bulbs and incandescent too.
1.5mm 21A LED Cable
£0.49
- Stranded Equipment Wire, 16AWG Wire Size.
4 colours: black, red, blue and white.
All available by the metre and in 100m rolls. - Copper Conductor Stranding: 16/0.2mm
Cable Diameter: 1.5mm
Outer diameter: 3.15mm
Voltage Rating: 600Vrms
PVC Insulation Material
Insulation Thickness: 0.3mm
Current Rating: 21A
Resistance: 38R/km
Standards Met: AWM UL 1015, BS6231 Type CK, CSA c.22.2 No.127, UL/cUL Subject 758
Suitable for general use and interconnection within apparatus
E14 Lampholder - Black & White
£0.85
-
E14 Lampholder & Nut assembly for cabochons, available in Black or White.
You can never be too safe when it comes to wiring, so with our spike on holder there is no need to strip the copper wire back to expose the copper. All you have to do is place the wires in the two openings and screw the bottom on to make a connection.
-
Size, including nut: 44x24x25mm; thread19x19mm
For complete illumination, as well as the lampholder and nut, you will need the following items:
1. E14 Cabochon Cap & Base, *G40 or G45 Golfball with LED
2. E14 LED or Incandescent Bulb
3. 24v Power Supply Unit (PSU)
4. E14 *Face Nut for use with G40 or G45 Golfball Bulb
Fitting - Drill a 20mm hole in your panel or letter face, push the spike lamp holder fitting through the back of the hole and screw the E14 Base to the front on the thread of the spike fitting. Easy. The LED or incandescent bulb can be screwed in through the centre of the base and then the cap is screwed over the top. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.
The maximum thickness of material is 12mm. If your substrate is thicker than this the back will need to be rebated to the correct depth with a 27mm diameter.
Please note. Some batches of lampholders have a '24v' impression in the moulding, these are no different to any that don't have a visible impression, and are perfectly fine for use with 12v, 24v, 60v & 240
E14 16-LED 24v module - Pure & Warm White
£2.00
-
High Quality E14 16 LED module with E14 screw fitting designed to fit the E14 cabochon
Perfect to create retro signs using a modern efficient lighting solution.
Available in Pure (5800k-6600k) and Warm White (2700k-3200k)*
You will need the following to complete the unit:
1. E14 Cabochon Cap & Base
2. E14 Spike Lampholder and Nut
3. 24v Power Supply Unit (PSU) if applicable
-
Size: 27x28mm
Fitting: E14 (MES)
Wattage: 0.85w
LEDs: 16 (12 on face, 4 on rear)
Lumens - 96lm
Voltage: 24v
Rated: IP54
Please Note:
*Whilst we endeavor to never mix batches on the same order, LEDs bought at different times, may burn at different colours.
5m Double Wire Adaptor - 3A
£7.50
- 5mm Twin wire extension lead
2.1mm DC socket to 2.1mm DC plug
Supplied with 2x 3-port lever connectors - Black PVC Insulation Sheath
Current Rating: 3A
Suitable for 12v or 24v
Perfect for marquee 'LOVE style' letters
Extension for 1.5mm cable to 'plug' style PSU - Datasheet Download
2, 3 & 5 Port Lever Clamps - 10pk
£4.00
- Lever Cage Clamp Terminal Block (0.08-4.0mm, Pack of 10)
Available as 2-port, 3-port & 5-port
Cage clamp inside the connector block
Integrated orange levers for easy use - Each size is packed in 10
Conductor Sizes: 0.08mm - 2.5mm solid core & stiff stranded core - 0.08mm - 4.0mm flex
Sizes:
- 2 port: 20.5Lx14.5Wx12.4Hmm
- 3 port: 20.5Lx14.5Wx17Hmm
- 5 port: 20.5Lx14.5Wx26.6Hmm
Strip length: 9-10mm
Single pole commoning terminal
Colour: Grey/Orange
Current rating 32A
Voltage rating 0-400v/4kv - Datasheet Download
E14 Face Nut - White & Black
£0.20
-
Keeping it all together, the face nut is used to fasten onto the face outside thread of an E14 lampholder.
This means the lampholder can be fixed in place and other types of bulbs can be used using the same fitting, ie: E14 Golfball bulbs.
Available in Black or White
.
-
For complete illumination, as well as this face nut, you will need the following items:
1. E14 G40 or G45 Golball with LED
2. E14 Lampholder and Nut
3. 24v Power Supply Unit (PSU)
Fitting - Drill a 20mm hole in your panel or letter face, push the spike lamp holder fitting through the back of the hole and screw the E14 Base to the front on the thread of the spike fitting. Easy. The LED or incandescent bulb can be screwed in through the centre of the base and then the cap is screwed over the top. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.
The maximum thickness of material is 12mm. If your substrate is thicker than this the back will need to be rebated to the correct depth with a 27mm diameter.
Please note. Some batches of lampholders have a '24v' impression in the moulding, these are no different to any that don't have a visible impression, and are perfectly fine for use with 12v, 24v, 60v & 240
E14 Incandescent Bulbs - 24v, 60v & 230v
£0.75
- E14 Cabochon Fairground Dimmable Incandescent Bulb with E14 screw fitting.
All sizes available in White only
You will also need the following to complete the unit:
1. E14 Cabochon Cap & Base
2. E14 Spike Lampholder and Nut
3. 24v Power Supply Unit (PSU) if applicable - see Technical -
24v:
Size: 44mm inc. thread, 18mm dia.
Power: 5w
Lumens: 30lm
For complete illumination, as well as this bulb, you will need the following items:
1. E14 Cabochon Cap and Base
2. E14 Lampholder and Nut
3. 24v Power Supply Unit (PSU)
60v:
Size: 45mm inc. thread, 18mm dia.
Power: 10w
Lumens: 48lm
For complete illumination, as well as this bulb, you will need the following items:
1. E14 Cabochon Cap and Base
2. E14 Lampholder and Nut
These bulbs are 60v and need to be wired in groups of 4 directly into a 240v mains supply.
230v:
Size: 52mm inc. thread, 15mm dia.
Power: 7w
Lumens: 36lm
For complete illumination, as well as this bulb, you will need the following items:
1. E14 Cabochon Cap and Base
2. E14 Lampholder and Nut
These bulbs are 230v and can be wired directly to the mains supply
NOTE: If you're not sure how to wire them together please ring for advice or speak to an electrician.
DC Power In-Line Socket Screw Termination - 2.1mm - 1A
£1.20
- Standard DC Power Female Adaptor
Designed to accept 2.1mm jack plugs
This adaptor allows you to connect a barrel jack connector to bare wires - no need to solder.
One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack.
Fit directly onto the Plug-in Style PSUs available making a quick and easy connection. - Suitable for 12v & 24v
Current rating: 2A
Straight type 2.1mm connector size
Brass contact material
Dimensions: 38 x 14 x 13mm
Integral cable strain relief 20-1066
DC Power In-Line Screw Termination Plug, 2.1, 2A
£1.10
- Standard DC Power Male Adaptor
This adaptor allows you to connect a barrel jack connector to bare wires - no need to solder.
One end has screw terminals and the other has a 5.5 x 2.1mm, center-positive male barrel jack. - Suitable for 12v & 24v
Current rating: 2A
Straight type 2.1mm connector size
Brass contact material
Dimensions: 38 x 14 x 13mm
Integral cable strain relief 20-1066
5m Single Wire Adaptor - 3A
£6.00
- 5mm Twin wire extension lead
2.1mm DC socket to bare ends
Supplied with 2 x 3-port lever connectors - Black PVC Insulation Sheath
Current Rating: 3A
Suitable for 12v or 24v
Perfect for marquee 'LOVE' style letters
Extension for 1.5mm cable to 'plug' style PSU
