All DMX Equipment

DMX DVC FUN Controller

£190.00

• Description
• Technical
• Download

• This DMX constant voltage Controller can be programmed on your computer, specifically to your needs and then downloaded direct to the unit.
  Using DMX cables, connect to your encoder/s and let this intelligent DMX interface work its magic with your LEDs.
  Any pattern ,any colour - the choice is endless.
  
  Each controller is delivered with a USB cable, 12v/24v-5v step down converter and instructions on downloading the software.
  
  
• Daslight 4 can be used with any DMX512 compatible lighting fixture
  Access to a library of over 15,000 fixture personalities (SSL2 files)
  Create your own using the Scan Library editor
  Map out lighting fixtures on the 2D view
  1 DMX OUT universe (128 channels only)
  128k stand alone memory
  Works with DVC4 limited software
  Limited to 32 steps per scene
  4 Simultaneous scenes playing at a time
  Upgradeable to FULL mode with 512 DMX channels without exchanging the interface
  Size: 121*39*39mm
  Compatible with Windows XP/VISTA/7/8/10, 32/64-bit
  Requires 3pin DMX cable to connect to master/slave, sold separately
  
  
• Datasheet Download
  

DMX Decoder 4ch x 6A

£57.50

• Description
• Technical
• Download

• **Temporarily Out of Stock**
  This constant voltage DMX driver allows for 24A of LED lights to be controlled via a DMX control signal over 4 channels.
  By accepting both DC supply voltage and your DMX controller signal this DMX Driver distributes the control signal to the attached LED lights.
  
  This driver accepts either XLR-3 type connections or RJ45 ethernet connections for the DMX signal input and output.
  There are a total of four, 3 channel, common anode outputs with screw-down terminal blocks for easy connection and control.

• Input Voltage: 5v, 12v, 24v
  Input Signal: DMX512, RDM
  Max Current Load: 6A x 4ch MAX c24AÂ
  Max Output Power: 120w/288w/576w (5v/12v/24v)
  Dimming Range: 0-100%
  Working Temp: -30C ~ 65C
  Size: 156*78*40mm
  
  Requires 3pin DMX cable to connect to master/slave, sold separately
  
  
  
• Datasheet

DMX Decoder 12ch x 5A

£120.00

• Description
• Technical
• Download

• This constant voltage DMX driver allows for 60 Amps of LED lights to be controlled via a DMX control signal over 12 channels.
  By accepting both DC supply voltage and your DMX controller signal this DMX Driver distributes the control signal to the attached LED lights.
  This driver accepts either XLR-3 type connections or RJ45 ethernet connections for the DMX signal input and output.
  There are a total of four, 3 channel, common anode outputs with screw-down terminal blocks for easy connection and control.

• Input Voltage: 5v, 12v or 24v constant voltage
  Input Signal: DMX512
  Max Current Load: 5A x 12Channels MAX 60A
  Max Output Power: 300w/720w/1440w (5v/12v/24v)
  Dimming Range: 0-100%
  Working Temp: -30C ~ 65C
  Size: 222*108*42mm
  
  Requires 3pin DMX cable to connect to master/slave, sold separately
  
  
• Datasheet

DMX Cables 3-30m

£13.50

DMX professional lighting cables for DMX controllers, master/slave connection. Choose from 3m, 6m, 10m or 30m lengths- 3-pin XLR plug...

DMX Wireless Transceiver

£66.00

• Description
• Technical
• Download

• LT-870 Wireless DMX512 transceiver transfers the standard DMX512 protocol data by wireless transmission. One send, one receive or multiple receive. (Supporting point to point, point to multi-point), a sending end can configure multiple receiving ends as long as the receiving end and sending end are set as same frequency point.
  
  This product can act as the transmitter and receiver. See the download sheet for the settings. It can also be used with our LT-874-5A receiver decoder with OLED display.

  The product is used for DMX console and lamp. The wireless data transmission between lamps replaces cable transmission which relies on twisted-pair, etc., for a long time. No delay and data is real-time and reliable during data transmission process. 

• Input Voltage : 5v~24v
  Working Frequency Channel: 2.4GHz ISM 64 channels
  Transmitted Power: -96dBm
  Range: Up to a max. 350m 
  Working Temperature: -20*C-55*C
  Dimensions: 175—44—30mm + aerial
  
  

  The product adopts 2.4GHZ RF global open ISM frequency channel, which is a low-cost, powerful wireless DMX512 transceiver and widely applied to DMX512 controllers from various manufacturers.

  64 channels choices, users can use 64 groups wireless network independently without interference in one place.

  Use relay Settings if need further increase the communication distance. 

• Datasheet Download
  

DMX Wireless Decoder with OLED Display

£74.00

• Description
• Technical
• Download

• This 4chx5A constant voltage DMX driver with OLED display receives standard DMX512 protocol data wirelessly.
  4 choices of power level.
  Visual communication distance can reach 350 meters at maximum transmitted power.
  Self-test inspection mode for testing the wireless link quality during installation.
  You can use relay settings or connect to a Booster Antennae to further increase the communication distance.
  
  Designed to work with our LT-870 transceiver.

• Operating Voltage : 5v (100w), 12v (240w) or 24v (480w)
  Working Frequency Channel: 2.4GHz ISM 64 channels
  Transmitted Power: -96dBm
  Range: Up to a max. 350m 
  Working Temperature: -20*C-55*C
  Dimensions: 175 x 53 x 30mm + aerial
  Output Current: Max 20A - 5Ax4ch
  
  
  
• Datasheet Download