10-40v 2 Output Flasher Unit, with 5amp max on each output With a choice of 15 flash patterns, from simple flashing, alternating, intermittent, hazard and 'emergency service' options. Supplied with an extra 'momentary switch', you can decide to solder this to the 'selector' wire to make changing the program simple: This is not required for the flashing unit to work.
Operating Voltage : 12v or 24v Power: up to 144w Dimensions: 42 x 12 x 3mm + connectors/remote Output Current: Max 10A - 5Ax2ch **To figure out how many amps your LED will use, divide the total number of Watts by the voltage. ie: 20 x Sgled3 LED modules @ 0.3w each = 6w total - 6w divided by 12v = 0.5amps
This easy to operate ultra slim, micro dimmer has multiple options. It's to be placed between the PSU and the LEDs to control the LED functions. By using convenient 2.1mm DC fixings at either end it couldn't be simpler. The connectors can be cut off and used with bare wires if necessary. To change the modes, brightness and speeds just press the buttons, Job Done!
This product isn't waterproof. It needs to be suitably protected from the weather and can either be positioned in a waterproof junction box or inside the building/house.
Will work with any of our 12v/24v single colour modules and strips.
Input Voltage: 12-24vdc Max Current Load: MAX 12A Max Outpur Power: 144w/288w (12v/24v) Working Temp: -30C ~ 55C Controller Size: 42*12*3mm + connectors