60mm Pixel Cabochon - 12v/24v
PIX60CU-12
Sold Out
-
60mm Pixel Cabochon - 12v/24v - Outdoor
**24v Temporarily Out of Stock** New stock due in Feb 2021
Our 60mm pixel cabochons are in 2 parts, the acrylic cabochon and the LED housing. The LED housing has 2 waterproof 3pin connectors on 110mm cables + connector exiting out of the bottom.
They connect to each other using the 3pin connectors and can be extended up to 512 lights in one run, with power injected every 30 lights.
These lights need a digital controller such as our T1000-S to make them run.
They are to be individually programmed and are used to create complex colour sequences and animations.
Extra Info
Link to Controller & Power Injection Cable
Link to Wiring Diagram
Link to Programming Software (Led Edit V3.53 2018)
- Max distance between to units is 265mm centre to centre. If you want more spacing you can use the Fairground Pixel Extension Cables
- Choose the 11mm extension, 500mm long, for the 60mm Pixel Cabochons
- Max thickness of material for the lampholder to push through is 12mm.
- For example a 100w 24v PSU will power 50 of these lights running at 90%.
Note: you will need to boost the power after 30no lights by connecting the power booster cable directly back to the PSU
Please note: Only 7no 12v remaining. All new stock will be 24v
We Will Beat Any Like For Like Price!
Seen it cheaper? Let us know - Wattage: 1.8w
Bulb Size: 60mm x 62mm
Bulb Material: Methacrylate
LEDs: 5050SMD Pixel
IC: 1903
Voltage: 12v/24v
Rated: IP65
Lifespan: 50,000hrs
Warranty: 1yrExtendable: Up to 512 lights Drill a 30mm hole in your panel or letter face and push the LED housing through from the back. On the front of the panel/letter, take the acrylic cabochon and screw onto the LED housing. This will trap itself in situ. The wires on the back of the light can then be connected to the next light and so on. -
