**Don't forget to use your trade discount codes for money off!**

 

E14 Face Nut - White & Black

E14Face-W



  • Keeping it all together, the face nut is used to fasten onto the face outside thread of an E14 lampholder.
    This means the lampholder can be fixed in place and other types of bulbs can be used using the same fitting, ie: E14 Golfball bulbs.
    Available in Black or White
    .


  • For complete illumination, as well as this face nut, you will need the following items:
    1. E14 G40 or G45 Golball with LED
    2. E14 Lampholder and Nut
    3. 24v Power Supply Unit (PSU)


    Fitting - Drill a 20mm hole in your panel or letter face, push the spike lamp holder fitting through the back of the hole and screw the E14 Base to the front on the thread of the spike fitting. Easy. The LED or incandescent bulb can be screwed in through the centre of the base and then the cap is screwed over the top. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.

    The maximum thickness of material is 12mm. If your substrate is thicker than this the back will need to be rebated to the correct depth with a 27mm diameter.

    Please note. Some batches of lampholders have a '24v' impression in the moulding, these are no different to any that don't have a visible impression, and are perfectly fine for use with 12v, 24v, 60v & 240


    Related Items