E10 Flat Cabochon in White or Chrome. With a choice of 15 UFO cap colours: Aqua, Clear, Orange, Yellow, Blue, Green, Red, Opal, Fuchsia, Magenta, Purple, Turquoise, Fluorescent Pink, Fluorescent Yellow & Fluorescent Orange
The flat cabochon base is 47mm dia, and with the standard E10 40mm dia cap, the overall height is 21mm. It has an extended back which protrudes 14mm and is 18mm dia. A standard E10 lampholder would screw into the this part from the back Our E10 Flat Fairground lights create a different effect from the standard cabochons, giving an stunning illumination to the face whilst being very low profile units. They are made of multicolor transparent metachrylate and have a bright effect with central luminous lens.
You will need the following items to complete the flat cabochon lights: 1. E10 Spike Lampholder and Nut 2. E10 24v LED or 24v or 230v Incandescent Bulb 3. 24v Power Supply Unit (PSU) if applicable
Fitting: Drill a 14mm hole in your panel or letter face, push the spike lamp holder fitting through the back of the hole and screw the E10 Base to the front on the thread of the spike fitting. Easy. The LED or incandescent bulb can be screwed in through the centre of the base and then the cap is screwed over the top. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.
60w 5v Constant Voltage Single Output LED Driver. Branded 'Meanwell' drivers renowned for their long term reliability and safety. These units have built in protection against : Open Circuits, Short Circuits, Over Loads, Over Heating IP67 - EXTERNAL & INTERNAL
90-264VAC input only Fully encapsulated with IP67 level (Note.5) Protections: Short circuit / Over load / Over voltage / Over temperature Cooling by free air convection Pass LPS 100% full load burn-in test Suitable for LED lighting and moving sign applications High reliability / Low cost 2 years warranty