Face decoration on trays, letters and fabricated signs.
👉 They require a 12mm hole drilling in material that is a maximum of 1.5mm thick.
Voltage: 5v and 12v
Details at a glance
DOT12RGB-P LED Pixel Modules
Our 5v DOT12RGB-P LED Pixel Modules are designed to add decorative finishes to almost any surface whilst giving you full control over the colour using a suitable RGB controller & PSU. The DOT12RGB-P pushes through from the back of the material and has a beam angle of only 90° to give that 'spotty' effect you want from them.
Please download our specification PDF, in the tabs above, for more information.
As with all our LED modules, it is completely encapsulated for outdoor use.
To fit the DOT12RGB-P you need to drill a 12mm hole in your material, a max of 70mm apart, and push through from the back. The material thickness must be a maximum 1.5mm thick.
In order to use our Dot12RGB-P modules you need to use a Pixel controller. We also have a have a range DMX controllers available on our website. If you're unsure please get in touch and we'll guide you.