This 4chx5A constant voltage DMX driver with OLED display receives standard DMX512 protocol data wirelessly. 4 choices of power level. Visual communication distance can reach 350 meters at maximum transmitted power. Self-test inspection mode for testing the wireless link quality during installation. You can use relay settings or connect to a Booster Antennae to further increase the communication distance.
Designed to work with our LT-870 transceiver.
Operating Voltage : 5v (100w), 12v (240w) or 24v (480w) Working Frequency Channel: 2.4GHz ISM 64 channels Transmitted Power: -96dBm Range: Up to a max. 350m Working Temperature: -20*C-55*C Dimensions: 175 x 53 x 30mm + aerial Output Current: Max 20A - 5Ax4ch
Have you ever wanted to control your LED lights with your iphone? This little gem will let you do just that. The RGB Controller uses a Wifi connection through an IOS or Android Smartphone. You can use this to control RGB leds, single colour leds, Colour temperature leds, and RGB bulbs.
You'll need to download an app to your phone, but once done, there are few limitations to the effects you can program in.
The LED Receiver gets information wirelessly via the 3050 wireless transmitter using a 300Hz~20KHz PWM pulse signal. *This receiver needs to be used with our transmitter LT-3050. When the 2 are set to the same frequency the receiver will repeat the signal sent from this transmitter. Multiple receivers can be used with the same transmitter. A sending end can configure unlimited receiving ends. A very good solution for the LED project that needs to sync control wirelessly i.e, between buildings, both sides of the roads, river banks and bridges, etc.etc.
Can be used with single colour and RGB strips/modules.
Operating Voltage : 5v~24v Max Current Load: 5A x 3ch MAX 15A Max Output: 75w/180w/360w (5v/12v/24v) Working Frequency Channel: 2.4GHz ISM 64 channels Receiver Sensitvity: -96dBm Range: Up to 350m Dimensions: 175 x 44 x 30mm + aerial