Skip to content
Squiggly Background - Weloveleds Squiggly Background - Weloveleds
Squiggly Background - Weloveleds Squiggly Background - Weloveleds

Fairground Light Components & Accessories

The components and accessories you need to wire, build and finish a fairground lighting installation — from cabochon caps and lamp holders through to LSZH cable, connectors and wire adaptors.

Whether you're building a new display from scratch, extending an existing run or replacing a worn part, this is where to find the individual pieces that hold it all together.

Fairground Light Components & Accessories

Filters

  • 5m Double Wire Adaptor - 3A WeLoveLeds
    £7.50 - £7.50
    £7.50
    £7.50 - £7.50
    £7.50

    5m Double Wire Adaptor - 3A

    5m Wire extension lead2.1mm DC Socket to DC PlugSupplied with 2 x 3-port lever connectorsBlack PVC Insulation Sheath

  • DC Power In-Line Socket Screw Termination - 2.1mm - 1A Connectors WeLoveLeds
    £2.00 - £2.00
    £2.00
    £2.00 - £2.00
    £2.00

    DC Power In-Line Socket Screw Termination - 2.1mm

    Standard DC Power Female AdaptorDesigned to accept 2.1mm jack plugsThis adaptor allows you to connect a barrel jack connector to bare wires - no ne...

    View full details
  • DC Power In-Line Screw Termination Plug, 2.1, 2A Connectors WeLoveLeds
    £1.30 - £1.30
    £1.30
    £1.30 - £1.30
    £1.30

    DC Power In-Line Screw Termination Plug, 2.1mm

    Standard DC Power Male AdaptorThis adaptor allows you to connect a barrel jack connector to bare wires - no need to solder.One end has screw termin...

    View full details
  • Splice Red Connector, 100pk Connectors WeLoveLeds
    £8.50 - £8.50
    £8.50
    £8.50 - £8.50
    £8.50

    Splice Red Connector, 100pk

    Snap On Red Splice Wire Connectors. Direct tapping into existing insulated copper wire - no stripping required.Available in packs of 100no 

  • DC Power In-Line Solder Termination Socket, 2.1mm, 2A Connectors WeLoveLeds
    £2.10 - £2.10
    £2.10
    £2.10 - £2.10
    £2.10

    DC Power In-Line Solder Termination Socket, 2.1mm, 2A

    Standard DC Power In-Line Socket with Solder TerminalDesigned to accept 2.1mm power plugs - perfect for the Plug-In Style PSUs

WHAT'S IN THIS SECTION

This section covers the hardware and wiring components that support a fairground lighting installation. Cabochon caps and bases are available in E10 and E14 fittings across 15 colours — mix and match to create multi-colour displays or replace damaged units. Lamp holders come in spike-base versions for both E10 and E14, with face nut variants for panel-mount installations. Cable and connectors include 1.5mm LSZH LED cable rated to 25A and double wire adaptors for extending or branching runs.

E10 OR E14 — WHICH DO YOU NEED?

E10 (10mm thread) is the standard fitting for smaller festoon-style bulbs and most traditional fairground strings. E14 (14mm thread) is used for larger cabochon units and globe-style bulbs. Check your existing holders or bulbs before ordering — caps and holders must match the fitting size.

BUILDING OR REPAIRING

For new builds, start with your bulb and holder selection, then work out cable run length and connector requirements from there. For repairs, cabochon caps and lamp holders are the most commonly replaced parts — having the right thread size is all you need to get a direct match. If you're not sure what you need, drop us a message and we'll help you spec it out.