Our G40 'Complete Units' are a convenient way of adding more lighting to any of our lighting kits. Each kit page tells you how many additional lights can be added without upgrading the PSU supplied with the kit**. Just select the colours from the drop down list and we'll send you all you need to get going. With 7 colours of golfball to choose and 2 colours of lampholder you can create 1000's of combinations. Last few remaining of Yellow - only 18no left!
Note. The G40 Golfballs are only available as complete units or individual bulbs. We don't sell full kits of these due to lower stocks held. You can however mix and match and use these bulbs in a combination with any other kit, or on it's own as a smaller kit. **Take note that these bulbs are 1.2w each when doing your calculations.
We can tailor make kits, suited specifically for your needs, just let us know your requirements by emailing them to email@example.com
The complete unit includes: 1 x G40 24v Golfball 1 x E14 Lampholder 1 x E14 Facenut We can tailor make kits, suited specifically for your needs, just let us know your requirements by emailing them to firstname.lastname@example.org
- G40 Golfball lights 40mm dia x 45mm high with an E14 thread. - The fit into a standard E14 lampholder and required a face nut to fix the lampholder in place for the golfball to be screwed in from the face. - Max thickness of material for the lampholder to push through is 10mm. - Apx 25mm clearance required on the backside of the material for the wiring and lampholder nut - Golfball - 1.2w 24v - Each lampholder is rated upto 240v but is stamped with 24v for the kits purposes.
Fitting - Drill a 20mm hole in your panel or letter face, push the lamp holder fitting through the back of the hole and fix in place with a facenut. The golfball bulb will screw into the lampholder from the face. Easy. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.