Ex display E14 16-LED 24v module - Pure White & Warm White
1911003-WW-1w
£1.00
-
Once they're gone, they're gone!!
Ex display High Quality E14 16 LED module with E14 screw fitting designed to fit the E14 cabochon.
Perfect to create retro signs using a modern efficient lighting solution.
Available in Pure (5800k-6600k) and Warm White (2700-3200K)
The lights have been illuminated for approx 3000 hours so they have up to 25000+ hours left in them!
They are non-refundable/exchangeable.
All IP54* unless stated otherwise:
1911003 - Warm White 1w 99no
19020163 - Warm White 1w 114no
19040173 - Warm White 1w 260no
19070060 - Warm White 1w 48no
17100166 - Warm White .85w 235no
17120027 - Pure White .85w 30no
18030274 - Pure White .85w 39no
18040274 - Pure White .85w 30no
18080117 - Pure White .85w 28no
IP20* Warm White 1.6w 32no for internal use only.
IP20* Ice White 1.6w 113no for internal use only.
There is no guarantee if you mix and match these batches that they will burn at the same temperature.
Please make sure you have enough for your project as they will not match our current batch of LEDs and refunds or exchanges will not be given
3. 24v Power Supply Unit (PSU)
You will need the following to complete the unit:
1. E14 Cabochon Cap & Base
2. E14 Spike Lampholder and Nut
3. 24v Power Supply Unit (PSU)
- Size: 27x28mm
Fitting: E14 (MES)
Wattage: .85w/1w
LEDs: 16 (12 on face, 4 on rear)
Lumens - 96lm
Voltage: 24v
Rated: IP54/IP20
Download the spec sheet here
