**Don't forget to use your trade discount code on checkout**

 

60mm Pixel 12v Complete Unit *******

PIX60CU

Customizations Total: £0.00



  • Our 60mm Pixel 12v 'Complete Units' are a super effective way of adding excitement to our fairground lighting. 

    The complete unit includes:
    1 x 60mm Cabochon Cap & Base
    1 x domed LED unit with integral back nut and wires.

    1000's of combinations can be achieved using a digital programmer.
    They can be made to fade, flash and jump around - all at the touch of a button.

    Download our guides: **NEEDS AMENDING**
    Cabochon Kit Checklist
    Cabochon Fitting Guide
    Marquee Letters

    We can tailor make kits, suited specifically for your needs, just let us know your requirements by emailing them to info@weloveleds.co.uk

  • Size: 60x63mm
    Fitting: 30mm diameter 
    Wattage: 1.2w
    LEDs: 5050SMD Pixel 
    Lumens - 96lm
    Voltage: 12v
    Rated: IP65

    We can tailor make kits, suited specifically for your needs, just let us know your requirements by emailing them to leds@thesigngroup.co.uk

    Please Note: 
    Whilst we endeavor to never mix batches on the same order, LEDs bought at different times, may burn at different colours. 


  • - E14 Cabochons are 60mm dia tapering down to 40mm x 63mm high
    - Max thickness of material for the lampholder to push through is 10mm.
    - Apx 25mm clearance required on the backside of the material for the wiring and lampholder nut
    - LED bulbs - 1.2w 12v

    Our 60mm Pixel lights create a strikingly radial effect from the base, while the cap generates a highly attractive swirl effect, emitting powerful luminosity from all angles, for all to see.
    They are made of transparent methachrylate and have a bright effect with central luminous lens. It comes in 2 parts with a lens cap and a conic base with internal thread specially designed for the domed LED.

    Fitting - Drill a 30mm hole in your panel or letter face, push the LED fitting through the back of the hole and screw the cabochon base to the front on the thread of the fitting. Easy. Then the cap can be screwed on the top.