E14 40mm dia G40 Golfball LED light available in 8 colours. These are ideal for that Thirties Hollywood Razzamatazz feel
Colours: Clear Pure White(6000k), Opal Pure White (6000k), Clear Warm White(3000k), Opal Warm White (3000k), Tint Blue, Tint Green, Tint Red, Tint Yellow
For complete illumination, as well as this Golfball, you will need the following items: 1. E14 Lampholder and Nut 2. E14 Face Nut 3. 24v Power Supply Unit (PSU).
Size: 40mm diameter Wattage: 1.2w Voltage: 24v Lumens: 20lm Clear Pure White(6000k) 20lm Opal Pure White (6000k) 15lm Clear Warm White(3000k) 15lm Opal Warm White (3000k) 3lm Tint Blue 5lm Tint Green 2lm TintÂ Red 2lm TintÂ Yellow
They are designed to be used outside, with suitable fittings to protect from the water. Plus they are low voltage which carries very little safety issues when wired in correctly. Please ask a qualified electrician if you are in any doubt.
Fitting: Drill a 19mm hole in your panel or letter face, push the lamp holder fitting through the back of the hole and screw the E14 Face Nut to the front thread. This will hold the lampholder in place. Easy. The Golfball bulb is to be screwed in to the internal thread on the face and then they are ready for wiring. Job Done! This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.
60w 5v Constant Voltage Single Output LED Driver. Branded 'Meanwell' drivers renowned for their long term reliability and safety. These units have built in protection against : Open Circuits, Short Circuits, Over Loads, Over Heating IP67 - EXTERNAL & INTERNAL
90-264VAC input only Fully encapsulated with IP67 level (Note.5) Protections: Short circuit / Over load / Over voltage / Over temperature Cooling by free air convection Pass LPS 100% full load burn-in test Suitable for LED lighting and moving sign applications High reliability / Low cost 2 years warranty