Our handy cabochon kits come with everything you need to illuminate your project. Just select the colours from the drop down list and we'll send you all you need to get going.
With 15 cabochon colours & 2 LED colours to choose from you can create 1000's of combinations. If you want to mix & match, select 'mixed' from the drop down list and write the colours and quantities in the notes section on checkout.
For no extra cost, you can exchange the standard PSU and plug to a Plug-in style 18w/24v PSU** for that professional finish. Supplied with DC Power In-Line Screw connector, not fitted. Just pop it in the notes section on your order.
Download our guides:
Cabochon Kit Checklist
Cabochon Fitting Guide
We can tailor make kits to your requirements. Get in touch for details -firstname.lastname@example.org
- This kit includes:
10 x E10 Complete Units (Cabochon, Lampholder, 24v LED)
6m x 1.5mm Cable (3m Red & 3m Black)
2 x 2port lever connectors
1 x 18w 24v PSU*
1 x 3pin Plug
*You can add an extra 9 E10 Complete Units to this kit without upgrading the standard power supply
**You can add an extra 9 E10 Complete Units to this kit without upgrading the Plug-in style PSU
We can tailor make kits to your requirements. Get in touch for details - email@example.com
Whilst we endeavour to never mix batches on the same order, LEDs bought at different times, may burn at different colours.
- - E10 Cabochons are 40mm dia tapering down to 25mm x 43mm high
- Max thickness of material for the lampholder to push through is 10mm.
- Apx 25mm clearance required on the backside of the material for the wiring and lampholder nut
- LED bulbs - 0.85w 24v
- Each lampholder is rated upto 240v but is stamped with 24v for the kits purposes.
Our E10 Fairground lights create a strikingly radial effect from the base, while the cap generates a highly attractive Diamond like effect, emitting powerful luminosity from all angles, for all to see.
They are made of multicoloured transparent methachrylate and have a bright effect with central luminous lens. It comes in 2 parts with a lens cap and a conic base with internal thread for an E10 socket.
Fitting - Drill a 14mm hole in your panel or letter face, push the lamp holder fitting through the back of the hole and screw the E10 Base to the front on the thread of the spike fitting. Easy. The LED or incandescent bulb can be screwed in through the centre of the base and then the cap as screwed over the top. This isn't only a very simple method for the initial fix, it is also perfect for the maintenance of the sign as you only need to be able to get to the face.