62mm RGB Flat Cabochon x 4 kit - 24v
- What's Included?
- Other Info
The LEDs and flat cabochon are a sealed unit and are preprogrammed with various lighting displays, just give them power and they'll do their stuff!. They're numbered and the idea is to fit them consecutively next to each other so they can run through their programs. You can fit them however you want to get different effects, go nuts! Our 24v 62mm RGB Flat Cabochon kits are perfect for adding that something extra to your project or decoration. They are a slimline version of standard cabochons, protruding just 26mm on the face. The LED cycles through dozens of different colours and effects to give you something completely different. Very much a carnival feel.
*We offer the kit with or without the Power Supply so you can add more lights to your project whilst using the same PSU. The power supply will run upto 24 lights running at 90% power.
Each LED is individually programmed so it know's what to do, you don't need any other special controllers.
Download our guides:
Cabochon Fitting Guide (This is yet to be updated for RGB Cabochons, although the fitting method is identical)
We can tailor make kits to your requirements. Get in touch for details -email@example.com
- This kit includes:
4 x 62mm RGB Flat Cabochon Complete Units (Cabochon with LED, Washer, fixing nut and wire nut)
6m x 1.5mm Cable (3m Red & 3m Black)
1 x Single Wire adaptor
2 x 2port Lever Clamps
*1 x 72w 24v (3A) AC/AC PSU with 2.1mm DC plug & 3pin plug attached.
The PSU is offered as an option. You can purchase the kit without the PSU if you want to add more lights to the kit.
*The 72w PSU will power upto 24 lights in any combination of sets. 4, 8 or 16.
ie: Each light is 2.56w. 4 set = 10.25w. 8 set = 20.5w. 16 set = 41w.
As long as the total isn't more than 72w you can choose any combination to run
from 1 x 72w PSU.
We can tailor make kits to your requirements. Get in touch for details - firstname.lastname@example.org
- 62mm Flat Cabochons are 62mm dia to the outside of the housing. They accept a standard E14 lens to the face. They protrude from the face 26mm.
- Max thickness of material for the lampholder to push through is 10mm.
- Apx 25mm clearance required on the backside of the material for the wiring and lampholder nut
- LED bulbs - 2.56w 24v
- Each lampholder is rated upto 240v but is stamped with 24v for the kits purposes.
They are fit in the same way as the standard cabochons, just with a slightly different housing, along with an AC/AC Power supply.
Our E14 cap generates a highly attractive Diamond like effect, emitting powerful luminosity from all angles, for all to see.
They are made of transparent methachrylate and have a bright effect with central luminous lens. It comes in 2 parts with a lens cap and a complete lampholder/LED sealed unit.
Fitting - Drill a 20mm hole in your panel or letter face, push the lampholder/led unit through the face of the letter, making sure to use the washer seal provided. Secure the unit using the fixing nut provided. The wire is then placed in the slots on the back of the lampholder and forced onto the spikes with the other nut. This self pierces and creates the electrical connection needed.