Our 60mm Slim pixel lights each come complete with fixing nuts and 2 waterproof 3pin connectors on 130mm cable.
They connect to each other using the 3pin connectors and can be extended up to 512 lights in one run, with power injected every 30 lights.
These lights need a digital controller such as our T1000-S to make them run. They are to be individually programmed and are used to create complex colour sequences and animations.
For those of you that want to go the extra step with your projects, Pixel LEDs are the way to go!
- Max distance between to units is 300mm centre to centre. If you want more spacing you can use the Fairground Pixel Extension Cables - Choose the 11mm extension, 500mm, for the 60mm Slim Pixels - Max thickness of material for the lampholder to push through is 12mm. - For example a 100w 24v PSU will power 32 of these lights running at 90%. Note: you will need to boost the power after 30no lights by connecting the power booster cable directly back to the PSU
Wattage: 2.8w Bulb Size: 60mm x 53mm Bulb Material: Methacrylate LEDs: 5050SMD Pixel IC: 1903 Voltage: 24v Rated: IP65 Lifespan: 50,000hrs Warranty: 1yr Extendable: Up to 512 lights
Drill a 19mm hole in your panel or letter face, pass the wires one by one through the hole from the front, and push the light flat. From the back, take the nut provided and feed the wires through the nut, thread onto the back of the light and tighten. The wires on the back of the light can then be connected to the next light and so on.