End of Line - 60mm Pixel Cabochon - 12v - Outdoor 8no remaining
Our 60mm pixel cabochons are in 2 parts, the acrylic cabochon and the LED housing. The LED housing has 2 waterproof 3pin connectors on 110mm cables + connector exiting out of the bottom.
They connect to each other using the 3pin connectors and can be extended up to 512 lights in one run, with power injected every 30 lights.
These lights need a digital controller such as our T1000-S to make them run. They are to be individually programmed and are used to create complex colour sequences and animations.
For those of you that want to go the extra step with your projects, Pixel LEDs are the way to go!
- Max distance between to units is 265mm centre to centre. If you want more spacing you can use the Fairground Pixel Extension Cables - Choose the 11mm extension, 500mm long, for the 60mm Pixel Cabochons - Max thickness of material for the lampholder to push through is 12mm. - For example a 100w 24v PSU will power 75 of these lights running at 90%. Note: you will need to boost the power after 30no lights by connecting the power booster cable directly back to the PSU
Wattage: 1.2w Bulb Size: 60mm x 62mm Bulb Material: Methacrylate LEDs: 5050SMD Pixel IC: 1903 Voltage: 12v Rated: IP65 Lifespan: 50,000hrs Warranty: 1yr Extendable: Up to 512 lights
Drill a 30mm hole in your panel or letter face and push the LED housing through from the back. On the front of the panel/letter, take the acrylic cabochon and screw onto the LED housing. This will trap itself in situ. The wires on the back of the light can then be connected to the next light and so on.